Concrete Supplies You Can't Live Out When Refinishing A Concrete Stairway

Those old stairs leading to your porch have served you well, but they are looking a little rough around the edges these days. If you are like a lot of homeowners, you will pull up a few YouTube videos and plan a trip to the local home improvement store for a bag of concrete and some necessary supplies for a DIY repair job. Refinishing concrete steps seems like a simple venture, but truth be told, this job can get complicated really quickly, especially if you don't have the right tools for the job. Here is a look at some of the tools you must have for a DIY concrete step repair job. 

Concrete Forms 

It is easy to assume you can slather on a new layer of concrete without building forms to support the shape of the new stairs. However, without forms, you will spend far too long trying to smooth out all those rough edges. Plus, the concrete mixture can change shape and swell as it cures and dries, especially if there is no frame to support it. Go ahead and pick up a few sheets of plywood and some small sticks of lumber to build a basic form for the outer edges of your stairs. 

Heavy-Duty Wire Brush 

A heavy-duty wire brush is a must when you are preparing the old steps for the installation of the new concrete mixture. If you do not get all of the loose debris and pieces off of the surface of the existing concrete, it will compromise the finished project. Therefore, you need a heavy steel-bristled wire brush to scrub down the existing stairs and remove any bits of loose material. 

Concrete Mixer Bit 

Mixing concrete by hand can be a challenge, especially when you have to achieve a thick consistency to properly create for stair edges. Because the concrete mix you use for stair restoration will be incredibly thick, it is best if you have a mixer bit for your drill so you don't have to mix the material by hand. 

Textured Trowel 

Concrete trowels are necessary for any concrete job, but for stair steps, you need to pick up a textured trowel. This trowel has a series of grooves along the base so when you smooth out the concrete mixture after dropping a scoop, it creates a slightly textured pattern. These tiny grooves help wick moisture away and prevent the steps from being so smooth that they are slippery. 

To learn more, contact a company like P & L Concrete Products Inc.